sitemap contact us

ITO FILM

ito film image

Substrate인 FILM에 ITO(Indium Tin Oxide의 약자로서 In2O3와 SnO2의 화합물)를 박막으로 증착함으로써 투명성과 전도성을 함께 갖게 하여 평판 디스플레이의 투명전극으로 사용.

Substrate의 종류 : 제품 특성(경박단소, 가공성, Flexible, 내충격성 등)의 요구에 의해 Plastic Film사용.
ex) PET, COP, PC, PEN, PI, PPS…etc

안정적인 공급망 국내외 회사들과 협력, 다채로운 원자재 구입망의 보유로 원료공급에 대한 안정성 확보

대량생산가능 설비에 대한 지속적인 투자로 대량생산에 적합한 생산 Line 구축

품질에 대한 자신감 다방면의 경험에서 나온 획기적인 검사로 불량률 0%에 도전, 품질에 대한 엄격한 심사기준 보유

획기적인 기술력 경험 및 여러 실무진과의 협력으로 획기적인 기술력 보유


*제품별 스펙을 자세히 보시려면 각 모델 명을 클릭하세요.


Model No.
PET, ITO Layer HA200-0-188A-0
Clear H/C, PET, Non Glare H/C, ITO Layer HA400-AB-188A-H
Clear H/C, PET, Anti Blocking, ITO Layer HA400-AN-188A-H
Non Glare H/C, PET, Non Glare H/C, ITO Layer HA400-AG-188A-AG
Non Glare H/C, PET, Non Glare H/C, ITO Layer HC280-AG-188A-AG
Non Glare H/C, PET, Non Glare H/C, ITO Layer HI150-ABE-125A-AB
Model No. HA200-0-188A-0
CLASIFICATION MEASURING ARTICLE TEST CONDITION UNIT SPEC
THICKNESS Film Thickness Micrometer ㎛ 188±10%
ELECTRICAL CHARACTER Surface resistance 4Point Probe Ω/sq Rs±50Ω
OPTICAL CHARACTER Transmittance 550nm % -
Haze Haze Meter
(JIS K 7105)		 % <1.5
b* 　Haze Meter
(JIS K 7105)		 % 5.5±1.0
ENVIRONMENTAL CHARACTER High temperature Ⅰ 150℃ x 60min  R/Ro ≤ 1.25
High temperature II 90℃ x 240hr  ≤ 1.25
High temperature & Moisture 60℃ x 95% x 240hr ≤ 1.25
CHEMICAL CHARACTER Ethanol R.T 10min R/Ro ≤ 1.25
Acetone R.T 10min ≤ 1.25
Toluene R.T 10min ≤ 1.25
PHYSICAL CHARACTER ITO Adhesion Cross Cutting Test % 100/100
Hardcoat Hardness Pencil Hardness
(JIS-K 5600)		 - -
                         
Heat shrinkage MD 150℃ x 60min  % 0.8±0.3
TD 0.5±0.3
go to the top닫기
Model No. HA400-AB-188A-H
CLASIFICATION MEASURING ARTICLE TEST CONDITION UNIT SPEC
THICKNESS Film thickness Micrometer ㎛ 188±10%
ELECTRICAL CHARACTER Surface resistance 4Point Probe Ω/sq Rs±100Ω
Surface resistance uniformity % ≤ 10
OPTICAL CHARACTER Transmittance 550nm % ≥ 87
Haze Haze Meter
(JIS K 7105) 		% ≤1.0
b* Haze Meter
(JIS K 7105) 		% 3.0±1.0
ENVIRONMENTAL CHARACTER High temperature Ⅰ 150℃ x 60min R/Ro ≤1.25
High temperature  II 90℃ x 240hr ≤1.25
High temperature & Moisture 60℃ x 95% x 240hr ≤1.25
CHEMICAL CHARACTER Ethanol R.T 10min R/Ro ≤1.25
Acetone R.T 10min ≤1.25
Toluene R.T 10min ≤1.25
PHYSICAL CHARACTER ITO Adhesion Cross Cutting Test % 100/100
Hardcoat Hardness Pencil Hardness
(JIS-K 5600)		 H ≥3H
Heat shrinkage MD 150℃ x 60min  % ≤1
TD ≤1
go to the top닫기
Model No. HA400-AN-188A-H
CLASIFICATION MEASURING ARTICLE TEST CONDITION UNIT SPEC
THICKNESS Film thickness Micrometer ㎛ 188±10%
ELECTRICAL CHARACTER Surface resistance 4 Point Probe　 Ω/sq Rs±100Ω
Surface resistance uniformity % ≤ 10
OPTICAL CHARACTER Transmittance 550nm % ≥ 86.5
Haze 　Haze Meter
(JIS K 7105) 		% 4.0±2
b* 　Haze Meter
(JIS K 7105) 		　% 3.0±1.0
ENVIRONMENTAL CHARACTER High temperature Ⅰ 150℃ x 60min  R/Ro ≤ 1.25
High temperature  II 90℃ x 240hr  ≤ 1.25
High temperature & Moisture 60℃ x 95% x 240hr ≤ 1.25
CHEMICAL CHARACTER Ethanol R.T 10min R/Ro ≤ 1.25
Acetone R.T 10min ≤ 1.25
Toluene R.T 10min ≤ 1.25
PHYSICAL CHARACTER ITO Adhesion Cross Cutting Test % 100/100
Hardcoat Hardness Pencil Hardness
(JIS-K 5600)		 H ≥3H
Heat shrinkage MD 150℃ x 60min  % ≤ 1
TD ≤ 1
go to the top닫기
Model No. HA400-AN-188A-HN7
CLASIFICATION MEASURING ARTICLE TEST CONDITION UNIT SPEC
THICKNESS Film thickness Micrometer ㎛ 188±10%
ELECTRICAL CHARACTER Surface resistance 4Point Probe　 Ω/sq Rs±100Ω
Surface resistance uniformity % ≤ 10
OPTICAL CHARACTER Transmittance 550nm % ≥ 85.5
Haze Haze Meter
(JIS K 7105)　		 % 8.0±2.0
b* 　Haze Meter
(JIS K 7105)		 % 3.0±1.0
ENVIRONMENTAL CHARACTER High temperature Ⅰ 150℃ x 60min  R/Ro ≤ 1.25
High temperature  II 90℃ x 240hr  ≤ 1.25
High temperature & Moisture 60℃ x 95% x 240hr ≤ 1.25
CHEMICAL CHARACTER Ethanol R.T 10min R/Ro ≤ 1.25
Acetone R.T 10min ≤ 1.25
Toluene R.T 10min ≤ 1.25
PHYSICAL CHARACTER ITO Adhesion Cross Cutting Test % 100/100
Hardcoat Hardness Pencil Hardness
(JIS-K 5600)		 H ≥3H
Heat shrinkage MD 150℃ x 60min  % 0.8±0.3
TD 0.5±0.3
go to the top닫기
Model No. HC280-ANU-188A-HN7
CLASIFICATION MEASURING ARTICLE TEST CONDITION UNIT SPEC
THICKNESS Film thickness Micrometer ㎛ 195±15%
ELECTRICAL CHARACTER Surface resistance Initial(R0) 4 Point Probe Ω/sq -
After anneal(R1) 280±70
Initial heat resistance - ≤1.05
OPTICAL CHARACTER Transmittance Initial(R0) 550nm % -
After anneal(R1) ≥ 85
Haze - % 8±2
b* - - 2.6~3.6
*reference dimension
ENVIRONMENTAL CHARACTER High temperature & Storage R2/R1 - ≤1.1
Low temperature & Storage R3/R1 ≤1.2
Heat Cycle R4/R1 ≤1.2
High temperature & Moisture Rm/R1 ≤1.2
CHEMICAL CHARACTER Ethanol Rc2/R1 ≤1.2
Acetone Rc1/R1 ≤1.2
1mol/ℓ HCL Rc4/R1 ≤1.2
PHYSICAL CHARACTER ITO Adhesion Cross Cutting Test % 100/100
Hard Coat Hardness Pencil Hardness (JIS-K 5600) H ≥3H
Heat Shrinkage MD 150℃ x 60min  % ≤1.0
TD
go to the top닫기
Model No. HC280-ANU-188A-HN7
Clasification Measuring Test Unit SPEC.
Thickness Film Thickness Micrometer ㎛ 125±10%
Electrical Character Surface Resistance(R1) 4 Point Probe Ω/sq 150 ± 50
Resistance Unifornity % ≤10
Heat Stability R2/R1 ≤1.1
Optical Character Surface Anti-Blocking - Anti-Blocking
Rear IM Layer - IM Layer
Transmittance(T1) 550nm % ≥ 88
Haze(H1) Haze Meter(JIS K 7105) % ≤1.5
b*1 Haze Meter(JIS K 7105) % ≤2.0(reference value)
Environmental
Character		 High Temperature & Storage 85℃ x 250hr Rx/R1 ≤1.25
Low Temperature& Storage -40℃ x 250hr Rx/R1 ≤1.25
Heat & Shock -40℃↔90℃ x 250cycle Rx/R1 ≤1.25
High Temperature
& Moisture		 60℃ x 95% x 250hr Rx/R1 ≤1.25
Chemical
Character		 Ethanol R.T 10min Rx/R1 ≤1.25
Acetone R.T 10min ≤1.25
1mol/ℓ HCL R.T 10min ≤1.25
Physical
Character		 ITO Adhesion Cross Cutting Test % 100/100
Hardcoat Hardness Pencil Hardness
(JIS-K 5600)		 H ≥2H
Heat Shrinkage MD 150℃ x 30min % ≤1.0
TD
go to the top닫기

General values of HanSung's ITO Film

Thickness

(MICROMETER)		 188㎛ 188㎛ 188㎛ 188㎛ 188㎛ 125㎛

Surface Resistance

(4Point Probe)		 200Ω/sq 400Ω/sq 400Ω/sq 400Ω/sq 280Ω/sq 150Ω/sq

Transmittance

(550nm)		 ≥80.0% ≥ 87.0% ≥ 86.5% ≥85.5% ≥85.0% ≥88.0%

Haze

(Haze Meter)		 < 1.5% ≤1.0% 4.0±2.0% 8.0±2.0% 8.0±2.0% ≤1.5%

Hardness

(Pencil hardness)		 - ≥ 3H ≥ 3H ≥3H ≥3H ≥2H

HEAT SHRINKAGE

(100mm X 100mm)		 - ≤1.0MD ≤1.0MD ≤0.8MD ≤1.0MD ≤1.0MD

HEAT SHRINKAGE

(150℃ X 60min)		 - ≤1.0TD ≤1.0TD ≤0.6TD ≤1.0TD ≤1.0TD

*each film can be customized.


제품브로슈어제품 카탈로그 다운로드

address 경북 칠곡군 왜관읍 금산리 975번지 왜관산업단지 28B-1L 우편번호 718-800   telephone number 054-973-7561    fax number 054-973-7565   e-mail address itofilm@hanafos.com
 COPYRIGHTⓒ2011 HANSUNG ALL RIGHT RESERVED.